TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-24
PATHMON Messages
1080
Cause. A software or hardware failure resulted in a trap. This is an internal error.
These values give the process environment at the time the PATHMON process failed:
Effect. The PATHMON process terminates. If possible, it creates a dump file.
Recovery. Contact your HP representative and provide all relevant information as
follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Your PATHMON configuration file and the PATHMON process version
•
A description of the application task that was in progress when the error was
encountered
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and dump files, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
1081
Cause. During a cool start, the PATHMON configuration file was not compatible with
the currently running PATHMON process. This incompatibility can result from these
either the PATHMON configuration file is a pre-D30 version of the file (which is not
compatible with D30 versions of the PATHMON process), or the PATHMON
configuration file has an invalid file code (the valid file code is 310).
Effect. The cool start fails.
Recovery. Cold start the PATHMON environment.
*1080* PATHMON, TRAP: T=%trap S=%s-reg P=%p-reg E=%e-reg
L=%l-reg
%trap-no is the number of the trap for use with DEBUG
%s-reg is the stack register
%p-reg is the program counter register
%e-reg is the environment register
%l-reg is the local register
*1081* PATHCTL FILE IS INCOMPATIBLE (COLD START REQUIRED)