TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-30
PATHMON Messages
Recovery. Increase or decrease the value of the MAXTELLS attribute, depending on
the cause of the error.
1108
Cause. The number of PROGRAM descriptions has reached the maximum value
specified for the MAXPROGRAMS attribute of the SET PATHWAY command.
Effect. The ADD PROGRAM command fails.
Recovery. Increase the value of the MAXPROGRAMS attribute and reissue the ADD
PROGRAM command.
1109
Cause. An attempt was made to add a DEFINE definition to a server class, but the
total number of DEFINEs for all server classes has reached the maximum value
specified for the MAXDEFINES attribute.
Effect. The ADD SERVER or ALTER SERVER command fails.
Recovery. Increase the value of the MAXDEFINES attribute and reissue the ADD
SERVER or ALTER SERVER command.
1112
Cause. The command issued is not supported by this version of NonStop TS/MP.
Effect. The command fails.
Recovery. Issue a command that is compatible with the currently running version of
NonStop TS/MP.
1113
Cause. The command issued is not valid for an external TCP.
Effect. The command fails.
Recovery. Issue a command that is acceptable for use with external TCPs.
*1108* PROGRAM program-unit-name, TOO MANY PROGRAM ENTRIES
*1109* TOO MANY DEFINE ENTRIES
*1112* REQUESTED FUNCTION NOT SUPPORTED BY THIS VERSION
*1113* FUNCTION NOT ALLOWED ON AN EXTERNAL TCP