TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-32
PATHMON Messages
1118
Cause. The selection criteria does not apply to the specified objects because there is
no association between the objects.
Effect. The command fails.
Recovery. Reissue the command, specifying objects that have a relationship with
each other.
1119
Cause. The specified suspended terminal automatically aborted before being
restarted with AUTORESTART.
Effect. The terminal abends.
Recovery. Informational message only; no corrective action is needed.
1120
Cause. After a failure, AUTORESTART restarted the specified object.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1121
Cause. The specified object reached the AUTORESTART limit configured for it.
Effect. The object is not restarted.
Recovery. Solve the problem that is causing the persistent failures, then restart the
object. See the operating system errors or messages logged just before this message
to determine what caused the persistent failures. Once you start the object,
AUTORESTART is reenabled for the object.
*1118* SELECTION NOT APPLICABLE
*1119* TERM term-name, AUTO ABORTED
*1120* object-name, AUTORESTARTED
*1121* object-name, AUTORESTART DISABLED