TS/MP System Management Manual (H06.05+, J06.03+)

PDMCOM Messages (Numbers 1500-1999)
HP NonStop TS/MP System Management Manual—541819-007
14-4
PDMCOM Messages
1509
Cause. The string entered with FC command is too long.
Effect. The command fails.
Recovery. This error is very unlikely. Contact your Global Mission Critical Support
Center (GMCSC) with a description of the application task that was in progress when
the error was encountered.
1510
Cause. PDMCOM was not able to parse the command correctly.
Effect. The command fails.
Recovery. This error is very unlikely. Contact your Global Mission Critical Support
Center (GMCSC) with a description of the application task that was in progress when
the error was encountered.
1511
Cause. PDMCOM failed to communicate with the specified process name.
Effect. The command fails.
Recovery. Restart the Access Control Server (ACS). If this problem persists, contact
your HP Nonstop representative.
1512
Cause. PDMCOM failed to FREEZE or STOP the specified server in the specified
PATHMON.
Effect. The command is aborted.
Recovery. Determine the reason for failure and initiate the corrective action
accordingly. If the error is displayed during execution of an ALTER-DOMAIN command,
check the configuration of the server throughout the domain. Any inconsistency must
be corrected manually.
*1509* FC String too long
*1510* Invalid command for object type.
*1511* COMMUNICATION FAILED WITH <process name>.
*1512* <freeze/thaw/stop/start> FAILED FOR SERVER <server
name> IN PATHMON <pathmon name>.