TS/MP System Management Manual (H06.05+, J06.03+)

PDMCOM Messages (Numbers 1500-1999)
HP NonStop TS/MP System Management Manual—541819-007
14-8
PDMCOM Messages
1525
Cause. The number of CONTROL DOMAIN PARTITON command reached its
maximum value—128.
Effect. The command is rejected.
Recovery. Reduce the number of partition requests.
1526
Cause. The command is issued when the ACS infrastructure is shutting down.
Effect. The command is rejected.
Recovery. Start the ACS Infrastructure and then reissue the command.
1527
Cause. PDMCOM failed to open an OBEY file. <error no> indicates the error during
the OPEN operation.
Effect. The command fails.
Recovery. Check the error number and try to resolve the error condition. If the
problem persists, contact your HP NonStop representative.
1528
Cause. PDMCOM failed to read an OBEY file.
Effect. The command fails.
Recovery. The OBEY file might be corrupt. Create a new OBEY file and reissue the
command. If the problem persists, contact your HP NonStop representative.
1529
Cause. The FC command is issued in an OBEY file.
*1525* MAX LIMIT REACHED.
*1526* ACS INFRASTRUCTURE IS SHUTTING DOWN.
*1527* OPEN ERROR ON OBEY FILE, ERROR=<error no>.
*1528* READ ERROR ON OBEY FILE.
*1529* FC COMMAND IS INVALID IN AN OBEY FILE.