TS/MP System Management Manual (H06.05+, J06.03+)

ACS Subsystem Messages
HP NonStop TS/MP System Management Manual—541819-007
18-4
ACS Event Severity Levels
ACS Event Severity Levels
Event severity levels indicate the impact (on ACS subsystem resources and
processes) of an event occurrence detected by an ACS subsystem process. Every
event occurrence logged by the ACS subsystem indicates the severity of that
occurrence. Most events defined by the ACS subsystem can occur with any one of
several severity levels depending upon the context in which the event occurs and on
how well the ACS subsystem can recover from the occurrence.
Definition ZACL-DDL-EVENT-LEVEL Type Enum Tacl Enum
Begin
89 ZACL-VAL-EVENT-LEVEL-INFO Value 0 As "INFO".
89 ZACL-VAL-EVENT-LEVEL-STATUS Value 1 As "STATUS".
89 ZACL-VAL-EVENT-LEVEL-WARNING Value 2 As "WARNING".
89 ZACL-VAL-EVENT-LEVEL-ERROR Value 3 As "ERROR".
89 ZACL-VAL-EVENT-LEVEL-FATAL Value 4 As "FATAL".
End
Token -Type
ZACL-TY P-EVE NT-L EV EL Value is ZSP I-TDT-E NUM
Def is ZACL-DDL-EVENT-LEVEL.
ZACL-VAL-EVENT-LEVEL-INFO
The ACS subsystem does not generate info events. This event level is reserved for
future use.
ZACL-VAL-EVENT-LEVEL-STATUS
Indicates that the ACS subsystem made an orderly change in the state or status of
an object, resource, or process under its control or it detected an orderly change in
the state of an external resource or process. No recovery actions are required for
status events.
ZACL-VAL-EVENT-LEVEL-WARNING
Indicates that the ACS subsystem detected a possible problem in a Pathway
application or it detected a condition that might cause errors in ACS subsystem
processes in the future if not corrected. Recovery or preventive actions are advised
for warning events.
ZACL-VAL-EVENT-LEVEL-ERROR
Indicates that resources or processes required by the ACS subsystem have failed
or an ACS subsystem process encountered a condition that prevented it from
completing an operation. The operation, if any, is aborted but the process that