TS/MP System Management Manual (H06.05+, J06.03+)

ACS Subsystem Messages
HP NonStop TS/MP System Management Manual—541819-007
18-30
EMS Messages 1030 through 1039
ZACL-TKN-EVENT-CPU-NUMBER
contains the number of the physical CPU that was started on the system where the
event message was generated. This token is the subject of the event message.
Effect. Pathsend operations initiated in the CPU no longer fail with
FESCLINKMONCONNECT errors.
Recovery. This is an informational message only; no corrective action is needed.
EMS Messages 1030 through 1039
1030: ZACL-EVT-CPU-STOPPED
One or all of the ACS subsystem processes in a CPU on the local system failed or
were stopped in response to a STOP command. If due to a failure, the physical CPU
may have failed.
Token Descriptions
ZACL-TKN-EVENT-LEVEL
has the value of ZACL-VAL-EVENT-LEVEL-ERROR.
ZACL-TKN-EVENT-CPU-NUMBER
contains the number of the physical CPU in which the ACS subsystem processes
were stopped on the system where the event message was generated. This token
is the subject of the event message.
Effect. Pathsend operations initiated in the CPU fail with FESCLINKMONCONNECT
errors until the core processes are restarted.
Recovery. Use the CONTROL ACS command to restart the ACS subsystem
processes in the CPU.
Unconditional Tokens
ZACL-TKN-EVENT-LEVEL token-type ZACL-TYP-EVENT-LEVEL.
ZACL-TKN-EVENT-CPU-NUMBER token-type ZSPI-TYP-INT.
Event-Message Text
1030 - Core processes stopped in CPU cpu-number