TS/MP System Management Manual (H06.05+, J06.03+)

ACS Subsystem Messages
HP NonStop TS/MP System Management Manual—541819-007
18-31
EMS Messages 1030 through 1039
1031: ZACL-EVT-LOG-FILE-ERROR
An ACS subsystem process encountered an error while writing an event message to
the configured LOG1 or LOG2 event log file.
Token Descriptions
ZACL-TKN-EVENT-LEVEL
has the value of ZACL-VAL-EVENT-LEVEL-ERROR.
ZACL-TKN-EVENT-PROCEDURE
contains the name of the Guardian file-system procedure that reported the failure.
ZACL-TKN-EVENT-ERROR-CODE
contains the file-system error code returned by the failed operation.
ZACL-TKN-EVENT-FILE-NAME
contains the name of the event log file that was accessed by the failed operation.
Effect. The configured event log is closed. Event messages continue to be logged to
the other configured event log file, if it is open, using that event log's configured format
and filter.
If neither configured event log is open, all events generate messages, which are sent
to $0 in EMS format.
If an error occurs while writing to $0, $0 is closed and the event message is discarded.
The ACS subsystem attempts to reopen $0 when another event occurs.
Recovery. Correct the condition that caused the error, then reopen the configured log
files by stopping and restarting the ACS subsystem.
Unconditional Tokens
ZACL-TKN-EVENT-LEVEL token-type ZACL-TYP-EVENT-LEVEL.
ZACL-TKN-EVENT-PROCEDURE token-type ZSPI-TYP-STRING.
ZACL-TKN-EVENT-ERROR-CODE token-type ZSPI-TYP-INT.
ZACL-TKN-EVENT-FILE-NAME token-type ZSPI-TYP-STRING.
Event-Message Text.
1031 - Event log file operation procedure() failed, file
file-name, error errnum