TS/MP System Management Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP System Management Manual—541819-007
C-5
EXT ZEXTENTSIZE Values: 1 through 65,535
Default: No value is passed.
FILE ZFILE Values: One through seven alphanumeric
characters, including the $; first
character after the $ must be
alphabetic.
Default: N.A.
GUARDIAN-SWAP Values: Maximum of 10 disk volumes for
SERVER objects.
Default: Selected by operating system (from
_DEFAULTS DEFINE statement, if
available).
HELP N.A. Values: 1000 through 3999
Default: N.A.
HIGHPIN ZHIGHPIN Values: ON | OFF
Suggested value is ON for new
applications written for HP
NonStop(tm) systems.
Default: OFF
HOMETERM ZHOMETERM Values: Name of home terminal for servers
in class.
Default: Home terminal of the PATHMON
process.
IN ZIN Values: Name of input file.
Default: Spaces are passed for file name.
LINKDEPTH ZLINKDEPTH Values: 1 through 255
Value should be less than or equal to
the value of MAXLINKS. If
MAXLINKS is 0, use the
LINKDEPTH default.
Default: 1
Table C-2. Limits and Defaults for Parameters (page 3 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.