TS/MP System Management Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP System Management Manual—541819-007
C-6
MAXASSIGNS ZMAXASSIGNS Values: 0 through 4095
(for TS/MP 2.0 and 2.1)
Default: N.A.
Values: 0 through 8191
(for TS/MP 2.3 and later versions)
Default: N.A.
MAXDEFINES ZMAXDEFINES Values: 0 through 4095
(for TS/MP 2.0 and 2.1)
Default: N.A.
Values: 0 through 8191
(for TS/MP 2.3 and later versions)
Default: N.A.
MAXEXTERNAL-
TCPS
ZMAXEXTERNAL-
TCPS
Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXLINKMONS ZMAXLINKMONS Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Default: 0
Table C-2. Limits and Defaults for Parameters (page 4 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.