TS/MP System Management Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP System Management Manual—541819-007
C-9
MAXTCPS ZMAXTCPS Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrent
openers of the PATHMON process
(TCP, external TCP, LINKMON,
PATHCOM, and SPI) must not
exceed 800.
Recommended value if Pathway/iTS is not
installed at your site: 0.
MAXTELLQUEUE ZMAXTELLQUEUE Values: 0 through 300
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXTELLS ZMAXTELLS Values: 0 through 4095
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXTERMS ZMAXTERMS Values: 0 through 4095
Recommended value if Pathway/iTS is not
installed at your site: 0
MAXTMFRE-
STARTS
ZMAXTMFRE-
STARTS
Values: -1 Unlimited restarts
0 No restarts
1 through 32,767 Number of restarts
Default: 5
MODE ZMODE Values: ORDERLY | ABORTTERM |
IMMEDIATE
Default: ORDERLY
N.A. ZACCESS Values: I/O | INPUT | OUTPUT
Default: No value is passed.
N.A. ZEXCLUSION Values: EXCLUSIVE | SHARED|
PROTECTED
Default: No value is passed.
N.A. ZFILECODE Values: 0 through 65,535
Default: 0
N.A. ZRECORDSIZE Values: 1 through 4072
Default: No value is passed.
Table C-2. Limits and Defaults for Parameters (page 7 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.