TS/MP System Management Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP System Management Manual—541819-007
C-10
N.A. ZBLOCKSIZE Values: 1 through 4096
Default: No value is passed.
NODEINDEPEN
DENT
ZNODEINDEPEN
DENT
Values: ON | OFF
Default: OFF
N.A. ZNODEINDEPEN
DENTFORMAT
Values: YES | NO
Default: NO
NUMSTATIC ZNUMSTATIC Values: 0 through 4095; must not exceed
value of MAXSERVERS.
The number of dynamic servers for a
server class is MAXSERVERS
minus NUMSTATIC.
For better performance, the value
should be close to or equal to
MAXSERVERS.
Default: 0 (all servers are dynamic)
OUT ZOUT Values: Name of output file.
Default (SERVER):
Spaces are passed for file name.
Default (PATHCOM):
Output directed to PATHCOM list file
(typically the home terminal).
OWNERID ZOWNERID Values: [system-number.] group-number,
user-number or [nodename.] group-
name.user-name
Default: Owner ID of user who started the
PATHMON process.
PRI ZPRIORITY Values: 1 through 199
Default (the PATHMON process):
The priority assigned by $CMON, or
if $CMON is not active, the priority of
TACL minus 1.
Default (SERVER):
10 less than the priority of the
PATHMON process.
Default (Pathway/iTS TCP):
20 less than the priority of the
PATHMON process.
Table C-2. Limits and Defaults for Parameters (page 8 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.