TS/MP System Management Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP System Management Manual—541819-007
C-12
STATUS N.A. Values: QUIET | AGGREGATE
Default: QUIET
STDERR ZPWY-TKN-DEF-
SCSTDERR
Values: Name of the OSS stderr (standard
error) file.
Must not exceed 1024 bytes.
Default: None
STDIN ZPWY-TKN-DEF-
SCSTDIN
Values: Name of the OSS stdin (standard
input) file.
Must not exceed 1024 bytes.
Default: None
STDOUT ZPWY-TKN-DEF-
SCSTDOUT
Values: Name of the OSS stdout (standard
output) file.
Must not exceed 1024 bytes.
Default: None
TIMEOUT ZTIMEOUT Values: 0 through 16,383 SECS, or
0 through 1092 MINS, or
0 through 18 HRS
Default (LINKMON):
The LINKMON process waits
indefinitely for server I/O operation
to complete unless the send times
out during the I/O because of the
timeout value specified in the
SERVERCLASS_SEND_ call.
Default (Pathway/iTS TCP):
No timeout; TCP waits indefinitely for
server I/O operation to complete.
TMF ZTMF Values: ON | OFF
Default (SERVER): OFF
Pathway/iTS Default (PROGRAM):ON
Pathway/iTS Default (TERM):ON
UNTIL N.A. Values: DONE | TIMEOUT
Default: DONE
Table C-2. Limits and Defaults for Parameters (page 10 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
*PATHCOM is the interactive management interface.
**SPI is the DSM management programming interface.