Tuxedo 8.0 LLE README for H06.03

LLE_128_README.txt
READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION
Copyright 2005 Hewlett-Packard Development Company, L.P.
Product Name: LLE for NonStop Tuxedo (R8.0)
Export Control Classification Number (ECCN): 5D002
Product ID: HSR74V1
Component Product:
LLE for NonStop Tuxedo (R8.0 V1 Update 2 version):
T0220H11 - LLE for NonStop Tuxedo
DATE: This file was last updated on 27 June 2005.
I. Basic Product Installation Instructions
1. Ensure that requirements for using this product are met
(see Section IV Product Requirements below).
2. Ensure that prerequisites for the installation utility and any
product-specific installation requirements are met
(see Section V Installation Prerequisites below).
3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this
CD) containing the IPSetup User Guide, which provides instructions
for using IPSetup, a utility provided on the CD that enables
installation of Independent Products. You need Adobe Acrobat Reader
(available on this CD) to read or print the IPSetup User Guide.
4. Follow the pre-installation instructions in Section II below before
continuing to Step 5.
5. Run IPSetup and uncheck the "Use DSM/SCM" box, to allow IPSetup to
move the NonStop Kernel files to the correct ISVs. Newer releases
of DSM/SCM may unpackage NonStop Tuxedo's PAX files, and NonStop
Tuxedo has not been tested with these releases to ensure that they
are compatible with actions performed by NonStop Tuxedo's
Install.sh script.
If TCP/IP and FTP are unavailable, or if you have problems with
automatic file placement, use the instructions in the IPSetup User
Guide section "Manual Software Placement Using the IPSetup TACL
Program" to manually move NonStop Kernel files.
NOTE: If you are installing LLE (HSR74V1) at the same time as the
NonStop Tuxedo core services (HSR71V1), HP recommends that
first you use IPSetup for both distribution CDs. This places
all the files on the HP NonStop server. Then install both
the components at once, rather than installing them
sequentially.
6. Follow the post-installation instructions in Section III below,
after using IPSetup to place and install this product.
II. Pre-Installation Instructions
1. Ensure that you, the installation user, are not listed in
$SYSTEM.ZTCPIP.FTPUSERS.
Discussion: If you try to install products using IPSetup and your
Page 1

Summary of content (5 pages)