Tuxedo 8.0 README for H06.03

Core_README.txt
+ ALTER USER <userid>, INITIAL-DIRECTORY
+ EXIT
Alternatively, you can start SAFEGUARD from an OSS shell, for
example: gtacl -p safecom
III. Post-Installation Instructions
1. Invoke the INSTALL^TEMPLATES TACL macro to install the ZTSETMPL and
ZTUXTMPL EMS template files contained on the CD. This TACL macro
and instructions for its use are given in Support Note S92067B
(updated 24AUG94), which you can obtain by using the NonStop
Technical Library or by contacting your HP representative. The
INSTALL^TEMPLATES TACL macro is distributed on the SUT and can be
found in $<ISVvol>.ZINSAIDS.TACLMACS. To print the usage notes,
LOAD the file containing the macro and, at the TACL prompt, type:
INSTALL^TEMPLATES /OUT <outdev>/HELP
2. Ensure the following files in $SYSTEM.SYSTEM are secured for read
and execute permission by the NonStop Tuxedo administrator
user: DIST, DISTLIB, SUPE, and TSMPCOM. Typical security settings
are: "NxNx" or "AxAx".
3. Ensure the NonStop Tuxedo administrator user has read access
to $SYSTEM.SYSTEM.TSCHELP.
4. License $SYSTEM.SYSTEM.DISTLIB (for example, type the command:
FUP LICENSE $SYSTEM.SYSTEM.DISTLIB).
5. Use the ftp command to transfer the Install.sh shell script file
(in ASCII format) from the CD to an OSS directory.
6. Enter OSS by typing OSH at the TACL prompt.
7. Position (cd command) to the directory where the Install.sh file
was copied during step 5.
8. Turn on execute permission to Install.sh, for example, type the
command: chmod +x Install.sh
9. Execute the Install.sh script and follow the directions. Answer
Install.sh script questions as follows:
a. For the location of the files (which are the NonStop Tuxedo PAX
files that IPSetup placed in the ZOSSUTL ISV), type an OSS
pathname. For example: /G/system/zossutl
b. For the location for TUXDIR and other directories, HP
recommends that you accept the defaults, which use
/tuxedo8.0 for TUXDIR and then cause the other subdirectories
to be located under the /tuxedo8.0 directory.
IV. Product Requirements
Required Hardware:
Itanium-based HP NonStop Server
Minimum OS Release:
NonStop Kernel release H06.03
Requisite PVUs:
Page 3