ViewPoint Manual

Installation, Configuration, and Startup
ViewPoint Manual—426801-001
7-5
Installation Steps
2. To change an option, type its number, enter a new value, and press RETURN. (You
can interrupt the installation process at any time by pressing BREAK or CTRL-Y.)
When you type the option number, an explanation of the option is displayed along
with its current setting. For a more detailed description of these options, refer to
Appendix A, Server Assigns and Parameters
.
After entering a new value for an option, Install displays again the list of installation
options.
3. When all the option values are set correctly, type C and press RETURN.
Install completes the installation process.
You are now ready to start ViewPoint. For information on starting ViewPoint, see
“Starting and Stopping a ViewPoint Pathway” in the next subsection “NonStop™
TS/MP Configuration.”
Example 7-2. Installation Options
Viewpoint installation options:
1. ISV $DSV.ZVIEWPT
2. PROGRAM-SUBVOL $DATA.VIEWPT
3. DATA-SUBVOL $DATA.VIEWPT
4. PATHWAY-POBJ $DATA.VIEWPT.POBJ
5. EVENT-NOTIFY $ZEVEN
6. CPUS 0:1
7. SERVER-PRIORITY DEFAULT
8. TCP-PRIORITY DEFAULT
9. PRIMARY-COLLECTOR $0
10. PRIMARY-FILTER $DATA.VIEWPT.FLTRDFLT
11. LAST-EVENT-COLLECTOR $0
12. LAST-EVENT-FILTER $DATA
13. CLEANUP-HOUR 23
14. PRIMARY-CACHESIZE 320
15. LAST-EVENT-CASHESIZE 10
16. RECOVER-CACHE FALSE
17. SupressUnanswered FALSE
18. PATHWAY-OWNER COMMSW.NSM
19. PATHWAY-SECURITY “C”
20. PROGRAM-SECURITY “N”
Enter a number and press RETURN for an explanation or to update
an option value. Press BREAK or CTRL-Y to exit without
installation. Enter “C” and press RETURN to continue ViewPoint
installation.
Note. Every time you use the Install routine, ViewPoint installs new requesters, leaving any
existing requesters in the library. As a result, the library can become very large, consuming
disk space. The Install routine automatically deletes all but the most recent version of each
object and compresses the library.