ViewPoint Manual

Error Messages
ViewPoint Manual—426801-001
B-9
Error
0106
Cause. The message received from TACL was too small.
Effect. Your current operation may be unsuccessful.
Recovery. Make sure the TACL library version matches the ZVPT-TACL-SWCH
version. Supply the error numbers when reporting this internal error to a Compaq
representative.
0107
Cause. An error occurred while writing to the TERMTACL file.
Effect. Initialization is aborted.
Recovery. Try recreating the data files by typing the following command: FUP /IN
FUPCMDS/.
0108
Cause. No link has been set up between TACL and Pathway. TACL must be running
on the terminal that initiates the Pathway startup.
Effect. It is not possible to switch to TACL from this environment.
Recovery. Set up a Pathway link. See Section 7, “Running ViewPoint Without TACL,”
for information on running ViewPoint when TACL is not present.
0203
Cause. A Pathway error was reported during a send operation.
Effect. The current status configuration file is not updated.
Recovery. See the Pathway SCREEN COBOL Reference Manual for an explanation of
SEND errors.
Reply from TACL was too small.
Error writing to the terminal-to-TACL file:
TACL is unavailable.
ZVPT-STAT-CNFG SEND failure: