ViewPoint Manual

Error Messages
ViewPoint Manual—426801-001
B-11
Error
0208
Cause. The object specified in the Object Name field is not valid for the status type
specified.
Effect. No object name is selected.
Recovery. Enter a valid object name and press F12.
0210
Cause. The configuration values given (aside from status type and object) are
incompatible.
Effect. No values are selected.
Recovery. Enter new configuration values and press F12.
0211
Cause. The object of the status display is not available because the monitor or resource
is down.
Effect. The object is not displayed.
Recovery. Wait until the object is available before trying to display it.
0212
Cause. The Scan Next function key (SF13) should not be pressed until a status item has
been retrieved using the Scan function key (F13).
Effect. No new status items are retrieved.
Recovery. Press F13 to retrieve a new status item, then press SF13.
The object specified is not valid for the status type.
The parameters specified in the item configuration are
incompatible.
The object of this status display is unavailable.
Use Scan key to retrieve an item before pressing Scan Next.