ViewPoint Manual

Definition of ViewPoint Screens
ViewPoint Manual—426801-001
3-7
Screen Navigation
Extras. For example, use F3 to go to the Primary Events screen or F14 to go to the
Profile screen.
You can also switch to the DSM/PM screens if DSM/PM is configured to run with
ViewPoint. For an example of how to access DSM/PM from ViewPoint, see Section 2,
Using ViewPoint.
If you do not have access to TACL, you can move among the remaining six screens in
the upper half of the diagram (including the Profile and Extra screens). Access the
screens by using the function keys.
You can access the Event Detail screen and the four configuration screens shown in the
lower half of the Figure 3-2 from only the four main status and events screens. Note
that you always use F12 to access any of the four configuration screens—the screen you
move to depends on what screen you are in and what you enter on that screen.
Figure 3-2. Screen Navigation Map
CDT032.cdd