Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-001
7-25
HELP Command
Considerations
•
If you use FC alone, the previous command is fixed (FC alone is the same as FC
1).
•
If you specify a negative number and the associated command line is no longer in
the history buffer, you will get an error message. The history buffer of command
lines is 1024 bytes in length.
•
The FC command does not increment the command line number in VHSCI prompt.
The display of command line numbers in the prompt is controlled by the
SETPROMPT command.
•
FC cannot be issued by a noninteractive user and is ignored if encountered.
•
Another command cannot follow the FC command on the same line.
•
For more information on the FC command, see the NonStop Kernel Operating
System User’s Guide.
Examples
HELP Command
The HELP command displays the syntax and meaning of VHSCI commands.
/OUT file-spec/
directs any VHSCI output generated for this command to the specified file.
ALL
displays general information about VHSCI. This includes all available commands
and how to use the HELP command.
-> FC
..STARFUS PROCESS $A
DDIT == deleting the letters RF and
inserting
== the letter T
..STATUS PROCESS $A
RVHS1 == replacing the A and spaces with VHS1
..STATUS PROCESS $VHS1
== finally, just a carriage return is
== entered, and the command is executed
HELP [ /OUT file-spec/ ]
[ ALL ]
[ basic-component ]
[ VHS error-number ]
[ command ]
[ object-type ]
[ object-name ]