Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-001
7-31
INFO Command
•
Generate-prompt-event specifies if an EMS event message must be generated
for a prompt type message. When Generate-prompt-event is set to ON, VHS
generates EMS events for prompt type messages. When Generate-prompt-event
is set to OFF, VHS does not generate EMS events for prompt type messages. By
default VHS sets Generate-prompt-event to ON.
•
Maxextens is the maximum number of extents to be used for the primary log file
creation. The numeric value assigned to Maxextents must be between 16 and 978.
If there is no value specified, the default maximum number of extents is 16.
•
Open-table-threshold is the percentage that represents the full value of the
opener table where VHS will generate an EMS event message. The numeric value
assigned to Open-table-threshold must be between 0 and 100. If there is no value
specified, the default value is 90.
•
Primary-security is used for the primary log file creation. The string value
assigned to Primary-security must be between quotes ( " ). If there is no value
specified the default value is “NUUU”.
•
Prompt-event-resend-delay specifies the time (in minutes) VHS will wait before
generating a repeat event for an unanswered prompt. This parameter is ignored if
VHS-GUI-MODE is set to OFF. The possible values are from 1 to 60.
•
Purge-savefile specifies if VHS should add the “force it” (!) option when sending a
SAVE command to Inspect. When Purge-savefile is set to ON, VHS adds the
“force it” (!) option when sending a SAVE command to Inspect. If the save file
already exists, it will be purged before creating the new one. When Purge-savefile
is set to OFF, VHS will not add the “force it” (!) option when sending a SAVE
command to Inspect. By default VHS sets Purge-savefile to OFF.
•
Remove-extra-spaces specifies if an occurrence of multiple spaces must be
replaced by only one space in the display type message. When Remove-extra-
spaces is set to ON, VHS replaces an occurrence of multiple spaces by only one
space in the display type message. When Remove-extra-spaces is set to OFF,
VHS logs the display type message as received. By default VHS sets Remove-
extra-spaces to ON.
•
Suppress-display specifies if EMS event messages are to appear in the
Viewpoint and NonStop NetMaster (NNM) screens. When Suppress-display is set
to ON, EMS events will not appear in the ViewPoint and NNM screens. When
Suppress-display is set to OFF, EMS events will appear in the ViewPoint and NNM
screens. By default VHS sets Suppress-display to OFF.
•
Vhs-GUI-mode specifies whether the VHS program will provide the VHS GUI
application with the proper events. Valid parameter values are ON or OFF. Refer to
Section 8, The VHS GUI, for more detail.
•
Vhs-logger specifies if VHS is to log in its primary log file. When Vhs-logger is set
to ON, VHS logs in its primary log files. When Vhs-logger is set to OFF, VHS does
not log in its primary log files. By default VHS sets Vhs-logger to ON.