Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-001
7-33
LISTOPENS Command
UNKNOWN
lists all opener processes that opened the specified object with no other
information.
PSERVER
lists all VHS prompt servers that opened the specified object.
Consideration
•
If there are no current openers, a warning is returned.
•
VHS cannot be opened by remote processes. VHS can only be opened by local
processes.
Examples
Output Format
The display of the LISTOPENS command has the following format:
•
Process is the name of a process which currently opens the VHS process as a
home terminal.
•
Objname is the program file name of the process which currently has the VHS
process open.
•
Mode is the type of message the opening process sends to the VHS process; it is
the reason why the VHS process was opened.
•
Time of open is the timestamp indicating when this process opened the VHS
process.
•
Time of last message is the timestamp indicating when the VHS process received
the last message from this process.
LISTOPENS PROCESS $vhs1
LISTOPENS /OUT OutListo/ PROCESS $vhs2, PROMPT
LISTOPENS PROCESS $vhs1, DISPLAY
10-> LISTOPENS PROCESS $vhsd
VHS ListOpens PROCESS $VHSD running under Environment PROD
Open Time of Time of
Process Objname Mode open last message
$JUNE $SYSTEM.SYS00.FUP PROMPT 10Jul96,11:55:34 13Jul96,11:45:26
$DISP $VHS.T9517QA.DISP512 DISPLAY 10Jul96,11:55:42 13Jul96,12:55:28
Note. All timestamps in VHS are in local civil time (LCT).