Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

Command Descriptions
Virtual Hometerm Subsystem (VHS) Manual—429311-001
7-42
STATS Command
Considerations
•
The REVERSE and DIM options can be used only on a Tandem 6530 or 6520
terminal or a device operating as a 6530 emulator. If these options are enabled on
any other terminal, the following error message displays:
VHS 20210 Invalid terminal type for REVERSE and/or DIM
option.
•
If the NONE option is specified, all the prompt-options are returned to their
default settings.
•
By default, the prompt-option NUMBER is enabled and all others are disabled.
Examples
STATS Command
The STATS command displays statistical information for the specified object or objects.
file-spec
causes any VHSCI output generated for this command to be directed to the
specified file.
object-spec
designates the object or objects whose statistical information is displayed. If
object-spec is omitted, the statistics for the assumed object display (see the
VHSCI ASSUME command).
RESET
if present, resets all the statistics counters to zero after the statistics are displayed.
Consideration
VHS has a safeguard to ensure the counter values do not become too large; this is
implemented as an automatic reset of all counters. If a counter is reset, a message
describing the action is logged in the primary log destination.
-> assume process $vhs
-> setprompt all, no volume
\SYS1 PROCESS $VHS1 3-> setprompt no object, no number
\SYS1 -> setprompt volume
\SYS1 $DATA.MYSUBVOL ->
STATS [ / OUT file-spec / ] [ object-spec ] [ , RESET ]