Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

The VHS GUI
Virtual Hometerm Subsystem (VHS) Manual—429311-001
8-4
VHS GUI Installation
EMS Forward
This is the EMS forwarding distributor that forwards the VHS EMS events to the central
node (see the filter example at the end of this section).
VHS GUI Installation
VHS GUI installation consists of the following steps:
STEP 1: Install VHS on the Compaq System.
To install VHS, see Section 2, Installing VHS.
STEP 2: Install the SeeView Server Gateway on Your Central
Compaq System.
To install the SeeView Server Gateway on your central host computer, refer to the
SeeView Server Gateway Manual. The manual provides an in-depth description of
how to install the SSG on NonStop servers. In brief, the steps are:
> LOGON network-group.userid
> VOLUME $SSG-ISV-Volume.ZNOWSSG
> SEEVIEW /in SSGSETUP/
Follow the directions contained in the SSG Online Help for 'Local Node Install'.
Once the SSG Installation is completed, start SSG by using the SSGCOM command
interpreter START command. For example:
> SSGCOM
+ START
STEP 3: Install the VHS GUI on Your Workstation Running
Windows NT.
A self-extracting VHS GUI is included in the VHS GUI Host Installation Subvolume
(ISV) with the file name VHSGUI.
To install the VHS GUI from the Compaq Host, you should perform the following steps:
1. Download VHSGUI from your Compaq Host system, and place it in a directory
such as C:\VHSISV.
2. Rename VHSGUI to VHSGUI.EXE.
Note. If DSM/NOW is installed on your VHS Central Node, SSG will have been installed as
well and does not need to be reinstalled.