Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-5
EMS Standard Definitions
EMS Standard Definitions
EMS standard definitions begin with ZEMS- and are listed in Table C-2. They are
described under each event message.
EMS standard definitions are described in detail in the following paragraphs. For
additional information on EMS standard definitions, see the EMS Manual.
ZEMS-TKN-ACTION-ID contains the number identifying a particular action-event
message.
ZEMS-TKN-ACTION-NEEDED is set to ZSPI-VAL-FALSE or ZSPI-VAL-TRUE. The
value TRUE means that the message is a request for action.
ZEMS-TKN-CPU contains the CPU number of the reporting VHS process.
ZEMS-TKN-PROC-DESC contains the process descriptor of the reporting VHS
process.
ZEMS-TKN-CRTPID contains the CRTPID of the reporting VHS process.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-FALSE or ZSPI-VAL-TRUE, depending on
the event message generated by the VHS process. The value TRUE means that the
event message is critical.
ZEMS-TKN-EVENTNUMBER contains the event message number for each VHS
event message.
ZEMS-TKN-GENTIME contains the time (Greenwich mean time) that the reporting
VHS process created the event message.
ZEMS-TKN-LOGTIME contains the time (Greenwich mean time) that the collector
wrote the event message to its log files.
Table C-2. EMS Standard Definitions Used by VHS
Header Tokens Data Portion Tokens
ZEMS-TKN-CPU ZEMS-TKN-ACTION-ID
ZEMS-TKN-PROC-DESC ZEMS-TKN-ACTION-NEEDED
ZEMS-TKN-CRTPID ZEMS-TKN-SUBJECT-MARK
ZEMS-TKN-EMPHASIS ZEMS-TKN-TEXT
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-GENTIME
ZEMS-TKN-LOGTIME
ZEMS-TKN-PIN
ZEMS-TKN-SUPPRESS-DISPLAY
ZEMS-TKN-SYSTEM
ZEMS-TKN-USERID