Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-20
5: ZVHS-EVT-DEBUG-ERROR
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-TRUE because this event message is
critical.
(ZEMS-TKN-) CPU, PROC-DESC, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-FALSE.
ZVHS-TKN-APPLICATION-NAME is the name of the application that has gone into
Debug.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
ZVHS-TKN-CPU is the CPU number the application is running in.
ZVHS-TKN-PIN is the process number of the application.
ZVHS-TKN-CRTPID is the process ID of the application that has gone into Debug.
ZVHS-TKN-PNAME is the process name of VHS.
ZVHS-TKN-OBJECTFILE is the object file name of the application trapped into Debug.
ZVHS-TKN-PRIMARY-LOG is the primary log name of VHS.
ZVHS-TKN-USER-ID is the user ID of the application trapped into Debug.
ZVHS-TKN-VHS-EMS-COLLECTOR is the EMS collector name used by VHS to
generate its EMS events.
ZVHS-TKN-VHS-OBJECTFILE is the object file name of VHS.
ZVHS-TKN-VERSION is the version of VHS.
Conditional Tokens
ZVHS-TKN-JOBID is the job ID used at starting time for the application trapped into
Inspect.
ZVHS-TKN-SUBDEVICE is the subdevice used at starting time for the application
trapped into Inspect.
Probable Cause
An application entered Debug. Debug prompts the VHS process. The VHS process
supplies commands to display register values and stop the application. You can look at
the results of these commands in the primary log file.