Manualshelf

Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series
241242243244245246247248249250
VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-25
7: ZVHS-EVT-PROMPT
Unconditional Tokens
ZSPI-TKN-SSID is the subsystem ID for VHS and is described in the SPI Programming
Manual. The value of this token is always ZVHS-VAL-SSID.
ZEMS-TKN-EVENTNUMBER is the event message number. The value for this event
message is ZVHS-EVT-PROMPT (7).
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that immediately precedes
the subject token ZVHS-TKN-APPLICATION-NAME.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-FALSE because this event message is an
action-attention event message.
(ZEMS-TKN-) CPU, PROC-DESC, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-FALSE.
ZEMS-TKN-ACTION-ID is set to an internal VHS reference number.
ZEMS-TKN-ACTION-NEEDED is set to TRUE to specify that this is an action-attention
event message.
ZVHS-TKN-APPLICATION-NAME is the application that has prompted VHS.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
Conditional Tokens Token Type
ZVHS-TKN-JOBID ZSPI-TYP-INT
ZVHS-TKN-PREVIOUS-MESSAGE-1 ZSPI-TYP-CHAR132
ZVHS-TKN-PREVIOUS-MESSAGE-2 ZSPI-TYP-CHAR132
ZVHS-TKN-PREVIOUS-MESSAGE-3 ZSPI-TYP-CHAR132
ZVHS-TKN-PREVIOUS-MESSAGE-4 ZSPI-TYP-CHAR132
ZVHS-TKN-PREVIOUS-MESSAGE-5 ZSPI-TYP-CHAR132
ZVHS-TKN-PREV-TIMESTAMP-1 ZSPI-TYP-TIMESTAMP
ZVHS-TKN-PREV-TIMESTAMP-2 ZSPI-TYP-TIMESTAMP
ZVHS-TKN-PREV-TIMESTAMP-3 ZSPI-TYP-TIMESTAMP
ZVHS-TKN-PREV-TIMESTAMP-4 ZSPI-TYP-TIMESTAMP
ZVHS-TKN-PREV-TIMESTAMP-5 ZSPI-TYP-TIMESTAMP
ZVHS-TKN-SUBDEVICE ZSPI-TYP-CHAR16
Event-Message Text
timestamp pid environment-name: Process process-id-string.
Prompt "prompt-string". Program file program-name. Primary
log file primary-log-name.