Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-33
101: ZVHS-EVT-BACKUP-CREATED
Unconditional Tokens
ZSPI-TKN-SSID is the subsystem ID for VHS and is described in the SPI Programming
Manual. The value of this token is always ZVHS-VAL-SSID.
ZEMS-TKN-EVENTNUMBER is the event message number. The value for this event
message is ZVHS-EVT-BACKUP-CREATED (101).
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that immediately precedes
the subject token ZVHS-TKN-PNAME.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-FALSE because this event message is
informative.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-FALSE.
ZVHS-TKN-PNAME is the process name of VHS.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
ZVHS-TKN-CPU is the CPU number of the VHS backup process.
ZVHS-TKN-PIN is the process number of the VHS backup process.
ZVHS-TKN-PRI is the priority of the VHS backup process.
ZVHS-TKN-VHS-OBJECTFILE is the object file name of VHS.
ZVHS-TKN-VERSION is the version of VHS.
Probable Cause
The VHS primary process has started a new backup process.
Recommended Action
This event message is an informative message only; no corrective action is necessary.
Event-Message Text
timestamp pid environment-name: Process VHS-process-name
created backup in CPU cpu-number. Priority priority. Program
file program-name.