Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-55
114: ZVHS-EVT-PROMPT-IO-ERROR
Unconditional Tokens
ZSPI-TKN-SSID is the subsystem ID for VHS and is described in the SPI Programming
Manual. The value of this token is always ZVHS-VAL-SSID.
ZEMS-TKN-EVENTNUMBER is the event message number. The value for this event
message is ZVHS-EVT-PROMPT-IO-ERROR (114).
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that immediately precedes
the subject token ZVHS-TKN-PNAME.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-TRUE because this event message is
critical.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-FALSE.
ZVHS-TKN-PNAME is the process name of VHS.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
ZVHS-TKN-OPERATION-CODE is the code corresponding to an I/O operation. The
value can be one of the following:
1. CREATE operation
2. OPEN operation
3. WRITE operation
4. CLOSE operation
5. ACCESS operation (file error on prompt file)
ZVHS-TKN-FILE-ERROR is the file-system error.
ZVHS-TKN-PROMPT-FILE is the prompt file name of VHS.
ZVHS-TKN-VHS-OBJECTFILE is the object file name of VHS.
ZVHS-TKN-VERSION is the version of VHS.
Probable Cause
VHS generates this event message when it is unable to access its primary log file.
Recommended Action
The recommended action depends on the file error.