Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-64
119: ZVHS-EVT-BAD-REPLY
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that immediately precedes
the subject token ZVHS-TKN-CRTPID.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-FALSE.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-FALSE.
ZEMS-TKN-ACTION-ID is set to an internal VHS reference number.
ZEMS-TKN-ACTION-NEEDED is set to FALSE to specify that this is an action-
completion event message.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
ZVHS-TKN-CRTPID is the process ID of the application that has prompted VHS.
ZVHS-TKN-MESSAGE-STRING is the prompt text string received by VHS.
ZVHS-TKN-PNAME is the process name of VHS.
ZVHS-TKN-OBJECTFILE is the object file name of the application that has prompted
VHS.
ZVHS-TKN-VHS-OBJECTFILE is the object file name of VHS.
ZVHS-TKN-VERSION is the version of VHS.
Probable Cause
VHS generates this action-completion event message when it cannot reply to the
application because the application is unavailable.
Recommended Action
Correct the problem that has made the application unavailable.