Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHS Event Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
C-121
153: ZVHS-EVT-DEBUG-EXTENDED
ZEMS-TKN-EVENTNUMBER is the event message number. The value for this event
message is ZVHS-EVT-DEBUG-EXTENDED (153).
ZEMS-TKN-SUBJECT-MARK is the standard EMS token that immediately precedes
the subject token ZVHS-TKN-APPLICATION-NAME.
ZEMS-TKN-EMPHASIS is set to ZSPI-VAL-TRUE because this event message is
critical.
(ZEMS-TKN-) CPU, PROC-DESC, GENTIME, LOGTIME, PIN, SYSTEM, USERID and
TEXT are described under EMS Standard Definitions on page C-5.
ZEMS-TKN-SUPPRESS-DISPLAY is set to ZSPI-VAL-TRUE.
ZVHS-TKN-APPLICATION-NAME is the name of the application that has gone into
Debug.
ZVHS-TKN-ENVIRONMENT-NAME is the name of the environment of this VHS. If no
environment name is defined using the VHS startup parameter ENVIRONMENT-
PARAM, then the default value is VHS.
ZVHS-TKN-CPU is the CPU number the application is running in.
ZVHS-TKN-PIN is the process number of the application.
ZVHS-TKN-CRTPID is the process ID in of the application that has gone into Debug.
ZVHS-TKN-MESSAGE-STRING is the message text received from or sent to Debug.
ZVHS-TKN-PNAME is the process name of VHS.
ZVHS-TKN-OBJECTFILE is the object file name of the application trapped into Debug.
ZVHS-TKN-PRIMARY-LOG is the primary log name of VHS.
ZVHS-TKN-SEND-RECEIVE-MSG indicates if the message contained in token ZVHS-
TKN-MESSAGE-STRING was received from Inspect or sent to Inspect. If it is ZVHS-
VAL-INSPECT-RECEIVE (0) the message was received from Inspect. If it is ZVHS-
INSPECT-SEND (1) the message was sent by VHS to Inspect.
ZVHS-TKN-USER-ID is the user ID of the application trapped into Debug.
ZVHS-TKN-VHS-EMS-COLLECTOR is the EMS collector name used by VHS to
generate its EMS events.
ZVHS-TKN-VHS-OBJECTFILE is the object file name of VHS.
ZVHS-TKN-VERSION is the version of VHS.
Conditional Tokens
ZVHS-TKN-JOBID is the job ID used at starting time for the application trapped into
Inspect.