Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
G-14
Message Descriptions
VHS 20084
Probable Cause. This instance of a quoted string can contain only number characters.
Recommended Action. Retype the command with a shorter quoted string length. The
FC command can be used to accomplish this.
VHS 20085
Probable Cause. The expected item is too long.
Recommended Action. Shorten the item to meet the required length limit.
VHS 20086
Probable Cause. The value portion of the PARAM command is too long.
Recommended Action. Reissue the PARAM command with a shorter param value
length.
VHS 20087
Probable Cause. The first G-relative memory location has been altered. This should
never happen under normal conditions. Usually, this is caused by an uninitialized
pointer.
Recommended Action. Contact your service provider.
VHS 20088
Probable Cause. When starting a trace, the trace file must be specified using the TO
option. When stopping a trace, the STOP option must be specified.
Recommended Action. Contact your service provider.
Quoted string can be no more than number characters long
item can be no more than number characters long
The maximum size of a param value is number characters
Internal Error: Memory location zero overwritten
Either the STOP or TO option must be specified in each TRACE
command