Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
G-15
Message Descriptions
VHS 20089
Probable Cause. The REPEAT command acts upon the entire remainder of the
command line, and therefore can only appear once in any command line.
Recommended Action. To obtain multiple levels of iteration, use REPEAT commands
within OBEY files.
VHS 20090
Probable Cause. The specified value is out of range.
Recommended Action. Specify a value within range.
VHS 20091
Probable Cause. A REPEAT command was specified prior to the execution of this
command.
Recommended Action. Do not specify the REPEAT command in conjunction with this
command.
VHS 20092
Probable Cause. Too many repeat commands were specified on long command lines.
Recommended Action. Put commands to be repeated in an OBEY file and repeat the
execution of the OBEY file.
VHS 20093
Probable Cause. The HELP command was entered without any help subject.
Recommended Action. Either leave the HELP command out of the repeated command
or issue the HELP command without first issuing the REPEAT command.
The REPEAT command may only appear once per command line
name value must be from lower-bound to upper-bound
This command is not allowed when a repeat command has been
issued
Repeat command stack overflow, command not available
Menu Mode HELP cannot be used in a REPEATed command