Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
G-25
Interprocess Communication Messages
-00012
Probable Cause. A fixed limit or configuration limit was exceeded. This error is usually
used to report any overrun of a limit, including internal control blocks or tables.
Recommended Action. The recovery action depends on the limit exceeded. For
information about recovery from this error, see the subsystem-specific reference
manual.
-00013
Probable Cause. A hardware problem occurred and the signal was lost.
Recommended Action. Recovery is hardware-specific; check the modem, port, and
other hardware.
-00014
Probable Cause. Unable to obtain memory space.
Recommended Action. This error usually indicates a resource-availability problem
caused by a large amount of activity (assuming that the configuration is proper for the
operating environment and that the associated hardware is functioning normally).
Attempt to determine and correct the problem, or wait awhile before reissuing the
request.
-00015
Probable Cause. An ADD request was attempted against a defined object.
Recommended Action. This is a warning. No action is necessary.
-00016
Probable Cause. A request to change the summary state of an object was issued but
the object is already in that state.
Recommended Action. This is a warning. No action is necessary.
Maximum Limit Exceeded: limit-number for obj-name
number Modem Error: number signal loss
Unable To Obtain Memory: text for obj-name
Object name Already Defined
Object name is already in state state