Virtual Hometerm Subsystem (VHS) Manual (H06.03+)

VHSCI Messages
Virtual Hometerm Subsystem (VHS) Manual—429311-001
G-30
Interprocess Communication Messages
-00037
Probable Cause. The command power specified on the command was insufficient to
change the state of the object.
Recommended Action. Reissue the command with a higher command power level.
-00038
Probable Cause. The command power specified on the command was insufficient to
change the state of the object.
Recommended Action. Reissue the command with a higher command power level.
-00039
Probable Cause. The object mentioned does not support the command.
Recommended Action. See the subsystem documentation for a more complete
description of when this object can and cannot support this command.
-00040
Probable Cause. This command has already been issued against this object and the
object is processing the command.
Recommended Action. None.
-00986
Probable Cause. An attempt was made to alter an attribute that is not alterable.
Recommended Action. Correct the problem and retry the request.
Command power level too weak for the state of object
object-name
Command power level too weak for the condition of object
object-name
Command not supported by object-name
Command in progress for object-name
Attribute is not alterable: attr