X25AM Programming Manual

PTP Applications
X25AM Programming Manual—527201-001
3-26
PTP Programming Tasks
Get the configured bilateral Closed User Group (BCUG) ID.
•
SETPARAM 35
Get the Recognized Private Operating Agency (RPOA) Data Network Identification
Code (DNIC).
•
SETPARAM 36
Get the transit delay value from the last call request packet.
•
SETPARAM 37
Get the optional CCITT-specified DTE negotiation facilities (throughput class, end-
to-end transit delay, and expedited data facilities).
•
SETPARAM 38
Get the originally called DTE address.
•
SETPARAM 39
Get the reason the call was redirected or deflected.
•
SETPARAM 40
Get the reason the called address was modified.
•
SETPARAM 41
Get the dynamic Call User Data (CUD) values for this session.
Setting Call Request Information
Use the following functions to set Call Request information:
•
SETPARAM 1
Set the remote DTE address.
•
SETPARAM 7
Set the configured Closed User Group (CUG) number.
•
SETPARAM 8
Set the protocol identifier.
•
SETPARAM 29
Set the local NSAP address.
•
SETPARAM 30
Set the remote NSAP address.
•
SETPARAM 31