X25AM Programming Manual

PTP Applications
X25AM Programming Manual—527201-001
3-58
Start the Data Exchange (Use Mode 3)
!
!Packet 2 is sent [P(S)=1,P(R)=0,M=1].
!
!An RR packet is received [P(R)=2].
!
!Packet 3 is sent [P(2)=2,P(R)=0,M=1].
!
!Packet 4 is sent [P(S)=3,P(R)=0,M=1].
!
!An RR packet is received [P(R)=4].
!
!Packet 5 is sent [P(S)=4,P(R)=0,M=1].
!
!Packet 6 is sent [P(S)=5,P(R)=0,M=1].
!
!An RR packet is received [P(R)=6].
!
!Packet 7 is sent [P(S)=6,P(R)=0,M=1].
!
!Packet 8 is sent [P(S)=7,P(R)=0,M=1].
!
!An RR packet is received [P(R)=0].
!
!Packet 9 is sent [P(S)=0,P(R)=0,M=1].
!
!Packet 10 is sent [P(S)=1,P(R)=0,M=0].
!
!The WRITE completes successfully.
!
!An RR packet is received [P(R)=2].
5. READ the data for a data block that is also a
logical record. The data will fill ten packets.
!
!Packet 1 is received [P(S)=0,P(R)=2,M=1].
!
!Packet 2 is received [P(S)=1,P(R)=2,M=1].
!