X25AM Programming Manual

Diagnostic Codes for X25AM
X25AM Programming Manual—527201-001
B-4
Clear Diagnostics
Clear Diagnostics
00/00 CPU or CIU switch while in state P2, P3, P5, P6, or P7 (call setup in progress).
PTP mode 2 user tried to write an invalid Call Accepted packet.
Application cleared the call using CONTROL 12 but did not set a Clear
Diagnostic.
14/20 Call Accepted, Clear Confirmation, Reset, Reset Confirmation, Interrupt, Interrupt
Confirmation, Data, RR, or RNR packet while in state P1.
15/21 Clear Confirmation, Reset, Reset Confirmation, Interrupt, Interrupt Confirmation,
Data, RR, or RNR packet while in state P2.
16/22 Call Accepted, Clear Confirmation, Reset, Reset Confirmation, Interrupt, Interrupt
Confirmation, Data, RR, or RNR packet while in state P3.
17/23 Clear Confirmation, Call Request, or Call Accepted packet while in state P4.
18/24 Clear Confirmation, Call Request, Call Accepted (DCE ONLY), Reset, Reset
Confirmation, Interrupt, Interrupt Confirmation, Data, RR, or RNR while in state
P5.
19/25 Clear Confirmation, Call Request, Call Accepted (DCE ONLY), Reset, Reset
Confirmation, Interrupt, Interrupt Confirmation, Data, RR, or RNR while in state P6
(DCE ONLY).
1A/26 Clear Confirmation, Call Request, Call Accepted (DCE ONLY) Reset, Reset
Confirmation, Interrupt, Interrupt Confirmation, Data, RR, or RNR while in state P7
(DTE ONLY).
21/33 Unknown packet type while in state P1, P2, P3, P5, P6 (DCE), or P7 (DTE).
22/34 Call Request received but line is configured for outgoing calls only.
26/38 Clear packet is too short (less than 4).
Call Request packet without address and/or facilities (less than 5). Call Accepted
packet is shorter than required (called/calling addresses would go beyond end of
packet).
Facilities length less than 64 but would go beyond the end of the packet.
27/39 Clear packet is too long (greater than 5).
Too much user data in Call Accepted packet (greater than 16 or greater than 128).
Too much user data in Call Request packet (greater than 16 or greater than 128).
29/41 Restart or Restart Confirmation packet with LCN less than or greater than 0 while
in state P1, P2, P3, P5, P6 (DCE), or P7 (DTE).
30/48 T23/T13 timeout occurred
31/49 T21/T11 timeout occurred.
32/50 T23/T13 timeout occurred waiting for incoming calls clear indication.
40/64 Facilities length greater than 63.
Facilities field extends beyond the end of the packet.
Facility extends beyond the end of the facilities field.