X25AM Programming Manual

X25AM Programming Manual—527201-001
Index-1
Index
A
ADD or ALTER commands 1-8
Annex G DTE Facilities 1-19
Application
access a subdevice 1-1
assigning a port number 1-5
description
ITI 2-1
PTP 3-1
file-system procedure summary 1-2
open a subdevice 1-1
X25AM errors 5-1
X25AM protocols 1-2
ATP6100 process 2-1
B
BREAK key processing 4-5
BREAK terminal command 4-9
BREAK (SET) terminal command 4-18
C
Call Accepted packet
call setup 1-3
X25AM support 1-11
Call user data 1-11
Called and Calling Address 1-11
facilities 1-11
Call clearing 1-3
Clear Confirmation packet 1-3
Clear Request packet 1-3
packets 1-6
virtual call 1-2
Call Connected packet
call setup 1-3
X25AM support 1-12
Call user data 1-13
Call Connected packet (continued)
Called and Calling Address 1-12
facilities 1-12
Call redirect facility 1-19
Call Request packet
call setup 1-3
network call routing 1-3
X25AM support 1-12
Call user data 1-12
Calling Address 1-12
facilities 1-12
X3PAD 4-7
Call setup 1-3
Call Accepted packet 1-3
Call Connected packet 1-3
Call Request packet 1-3
Incoming Call packet 1-3
packets 1-6
virtual circuit 1-2
CALL terminal command 4-10
Call User Data field
See CUD
Call User Data (CUD)
and User Data, compared 1-7
Canceling a READ
ITI application 2-3
PTP application 3-2
CCITT
Recommendation X.28 2-8
Recommendation X.29 2-8
Recommendation X.3 2-8
CHARKILL (SET) terminal command 4-19
Clear Cause and Diagnostic packet 1-13
Clear Confirmation packet
call clearing 1-3
X25AM support 1-13
Clear Diagnostic Codes B-4