X25AM Programming Manual

Index
X25AM Programming Manual—527201-001
Index-2
D
Clear Indication Packet
X25AM support 1-13
Clear Request packet
call clearing 1-3
X25AM support 1-13
CLEAR terminal command 4-11
Clearing a Call
ITI application 2-6
PTP application 3-4
CLOSE
ITI application 2-25
PTP application 3-29
Closed User Group
See CUG
CMI commands 1-10
Command state for X3PAD 4-4
Condition codes
D00 C-2
CONTROL 11 A-1
CONTROL 12 A-1
CONTROL 17 A-1
control packet
and data packet, compared 4-7
Conversion mode
READ Request 2-5
WRITE Request 2-6
WRITEREAD Request 2-5
CRDELAY (SET) terminal command 4-19
CUD data
ADD or ALTER commands 1-10
and hex characters 1-10
RESET attribute 1-10
SCF commands 1-8
static and dynamic, compared 1-9
CUD field
and port numbers 1-8
and SETMODE 28 1-9
and SETPARAM 41 1-9
default values 1-8
exceeding maximum length 1-11
CUD field (continued)
related SYSGEN modifiers 1-8
SCF commands 1-8
setting and fetching data 1-8
using 1-8
CUG
per call facility 1-16
D
D bit 3-6
modification subscription
parameter 1-15
D00
condition codes C-2
D00 file-system errors C-2
D00 file-system procedures C-1
D00 system messages C-2
Data block 3-5
Data forwarding 2-16
data packet
and control packet, compared 4-7
DATAPAC
priority call 1-18
Data-exchange modes 3-5
Data-transfer state for X3PAD 4-4
DCE 1-13
Delivery Bit
See D bit
Diagnostic Codes
Clear B-4
Reset B-2
Restart B-2
diagnostic octet for X3PAD 4-8
DTE
Clear Confirmation packet 1-13
dynamic CUD data 1-9