X25AM Programming Manual

Index
X25AM Programming Manual—527201-001
Index-6
N
N
N1 subscription parameter 1-14
N2 subscription parameter 1-14
NAM protocol 1-2, 1-19
Naming convention, subdevice 1-1
Network call routing
Call Request packet 1-3
Incoming Call packet 1-3
Network subscription parameters
See Subscription parameters
Nonstandard default
packet size 1-15
throughput class 1-15
window size 1-16
NOTIFY (SET) terminal command 4-21
O
OBEY terminal command 4-13
OPEN
ITI application 2-26
PTP application 3-31
OUT terminal command 4-14
P
Packet
call clearing 1-6
call setup 1-6
data 3-5
virtual call 1-2
Packet Assembler Disassembler
See PAD
Packet layer
subscription parameter 1-15
delivery (D) bit modification 1-15
extended packet sequencing 1-15
logical channels 1-15
nonstandard default packet
size 1-15
Packet layer
Packet layer (continued)
nonstandard default throughput
class 1-15
nonstandard default window
size 1-16
Packet-size negotiation 1-16
PAD
control packets 2-9
data forwarding and terminal
BREAK 2-17
description 2-7
forwarding data from the PAD 2-16
operation 2-8
packet exchange between PAD and
ITI 2-9
parameter conversion by ITI 2-11
parameters 2-10
Q bit 2-9
response packets 2-10
SCF configuration 2-12
sending parameters to the PAD 2-12
user-configurable options 2-12
Page mode
READ request 2-5
WRITE request 2-6
WRITEREAD request 2-5
PARITY (SET) terminal command 4-21
Pass-through mode 3-20
Per call facilities
address modification facilities 1-19
Annex G DTE facilities 1-19
BCUG facilities 1-18
call redirect facility 1-19
CUG
DATAPAC priority call 1-18
fast-select 1-17
packet-size negotiation 1-16
reverse charging 1-16
RPOA facilities 1-18
TELENET facilities 1-18