X25AM Programming Manual

Index
X25AM Programming Manual—527201-001
Index-10
T
setting and fetching the Call User Data 1-8
SHOW terminal command 4-22
SNAX connection 1-2
SNAX process 1-19
SPEED (SET) terminal command 4-21
static CUD data 1-9
STATUS terminal command 4-22
Subaddressing 1-3
port number 1-3
Subdevice
accessing 1-1
from an application 1-1
assigning a port number 1-5
assigning an incoming call 1-5
file-system 1-1
file-system buffer 1-1
naming convention 1-1
numbering 1-5
opening 1-1
from an application 1-1
port number 1-3, 1-5
protocol 1-2
Subscription parameters
frame layer 1-14
k 1-15
N1 1-14
N2 1-14
protocol 1-14
T1 1-14
T2 1-14
packet layer 1-15
delivery (D) bit modification 1-15
extended packet sequencing 1-15
logical channels 1-15
nonstandard default packet
size 1-15
nonstandard default throughput
class 1-15
nonstandard default window
size 1-16
Subscription parameters (continued)
per call facility 1-16
Annex G 1-19
BCUG facilities 1-18
call redirect facilities 1-19
CUG
DATAPAC priority call 1-18
fast-select 1-17
packet-size negotiation 1-16
reverse charging 1-16
RPOA facilities 1-18
TELENET facilities 1-18
throughput-class negotiation 1-17
transit delay 1-18
window-size negotiation 1-17
Subsystem 1-1
definition 1-1
object 1-1
line 1-1
subdevice 1-1
subsystem 1-1
SVC
See Virtual call
Switched Virtual Circuit
See Virtual call
System messages
D00 C-2
SYSTEM terminal command 4-23
T
T1 subscription parameter 1-14
T2 subscription parameter 1-14
TELENET
facilities 1-18
Terminal
control characters 2-18
operation 2-13
reset 2-14
Throughput-class negotiation 1-17