BackBox H4.00 User Manual

User Interface
122 BackBox H4.00 User Manual
Stand Alone Load – Common elements
Common page elements
Port Type: FC is the only possible value
Port Number: Identifies the port number connector in the VTC internal
configuration.
SCSI Lun: SCSI LUN ID assigned to the Guardian tape device by SCF (FC
connections).
Volume Label: volume label to load.
Label Type: Label type of the volume.
Data Store Type: TSM or Windows. This choice will change the fields presented
to the user.
Volume Lock: Manual lock prohibiting the volume data update by a tape
application. It is equivalent to the lock found on some physical media.
Unload tape from Device Prior to Load Operation: In normal operations, the
host sends a SCSI “unload” command when the volume is not being used . This
also avoid inopportune unload command that may abort a tape operation in
progress.
The check box should be left unchecked unless the user gets an “already in use”
replies and is able to confirm that no other user or application is using the
device.