BackBox H4.00 User Manual

User Interface
138 BackBox H4.00 User Manual
Page elements
Top section: List of all VTCs configured on the current Domain, displayed even
when no VT Controller is selected.
Virtual Tape Controller Information section: Displays the attributes of the
selected VTC.
Click the Update button after any change to this section.
VTC ports: List all physical ports prepared for BackPak operations inside the
VTC. Nothing can be entered in this section.
Virtual Devices: List the virtual drives already configured in the domain, and
their internal status. Procedures presented below allow adding these devices by
group of devices, simply by selecting the physical connection of the devices
(which VTC port and which NonStop host).
Device can also be removed from the domain configuration individually, i.e.
individually “deleted”
Finally all devices currently configured in the domain for the VTC can be updated
globally, to retrieve possible updated device names in NonStop SCF or delete
devices removed in the NonStop SCF.
The Update button is not required after a change to this section.