BackBox H4.00 User Manual

User Interface
167 BackBox H4.00 User Manual
Label Type: Filters volumes based on the label type.
Current Operation: Current operation on the volume.
Data Store: Filters volumes based on their Data Store.
Volume Group: Filters volumes based on the Volume Group.
Page size: Maximum number of volumes to return in the reply page. The user
can browse a large list by ‘Previous’ and ‘Next’ buttons.
Volume List
The Volume List section displays the virtual volume list that matches the specified filter.
Section elements
Delete Checked volume(s): Deletes all the checked volumes
All checkboxes: Check or uncheck all volumes displayed.
[Volume checkbox]: Check or uncheck the volume.
Volume Label: Volume label, or BackBox internal volume id for NL volumes.
Link to the volume detail page.
Type: Volume label type.
Data Store: Data Store to which the volume belongs.
Volume Group: Volume Group to which the volume belongs.
Catalog Status: if the Volume Group is associated, shows the catalog status
known during the last BackPak operation, or the last execution of the daily batch
OBB017
To be sure of the status of a single volume, open the Volume detail page.
To refresh the status of all volumes, the TACL job OBB017 must be re-executed.
There is no strong counter-argument against additional executions of the daily
batch OBB017: the main inconvenient is that the daily list of volumes processed
by OBB017 is split in several reports.
Current operation: Indicates the current operation (load, export), if the
current operation is a lock prohibits concurrent operation on the volume.
Size: Number of megabytes exchanged over the SCSI or fiber link. ‘Empty’ is
displayed when the volume contains only the tape headers and trailers.
Compression rate: If compression was enabled, displays the ratio
(uncompressed data size) divided by (compressed data size).
Use the Next (>)/ Previous (<) links at the bottom of the data grid to navigate
through the list.