BackBox H4.00 User Manual

Operations
70 BackBox H4.00 User Manual
I3173 BackBox storage space purge of expired tape volumes. 51
volumes in catalog, 3 volumes purged.
BBOX-BB017 ends at 2006-02-05 23:16
BB023_DEL_BACKEDUP
The BB023_DEL_BACKEDUP command will initiate a Windows process that will scan
all configured paths in PRIMARY WINDISK Data Stores, and according to the Volume
Group configuration associated with each volume, delete the Windows files that have
been saved to an enterprise backup server.
A file is considered archived if its archive bit is reset.
To permit deletion, the Volume Group configuration must allow it. Additional criteria
for the deletion may be specified in the Volume Group configuration page of the
BackPak user interface.
- number of days (number of full 24 hours periods) since the last modification
of the .DAT file before deletion.
- number of days (number of full 24 hours periods) since the last access of the
.DAT file.
- a minimum file size
Note the .IND file of a volume is never deleted when the Volume Group is not
associated with a NonStop tape catalog. The .IND file contains a copy of the tape
headers. When there is no NonStop tape catalog, the tape headers in the .IND file is
used to tell if the volume is expired. The presence of .IND files on Windows disks
allows the Auto-scratch procedure without having to read the data file.
Syntax
BB023_DEL_BACKEDUP STOREID {stored-id | ALL}
[, STOREID_ALIAS {0 | 1 | 2}]
[, START_TIME HH:MN],
[, END_TIME HH:MN]
[, MAX_DURATION minutes]
Parameters
STOREID {stored-id | ALL}
Specify a Store Id or ALL for all Data Stores.
[STOREID_ALIAS {0 | 1 | 2}]
Interpretation of the STOREID
value 0: no interpretation