Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

$system.zservice.zclimid file shows the CLIM name
to ID mapping – in the listing below N1002582 is mapped to 04.
\BLADQA3.$SYSTEM.ZSERVICE 25> fup copy zclimid
#ZCLIMID: Maps CLIM name to unique two character ID
N1002571 01
N1002573 02
N1002581 03
N1002582 04
N1002583 05
S1002531 06
S1002533 07
8 RECORDS TRANSFERRED
Files named ‘ZCL04*’ belong to CLIM debug files from CLIM N1002582.
There will be two sets of files, one set with ‘D’ (for data) in the
filename which contains the PAK-file with the CLIM log/crash files,
and the other set with ‘L’ in the filename which contains the log
of the user/OSM action of transferring the data from the CLIM file.
Both of these files, with the timestamp that is relevant to the problem
instance must be collected for analyzing a CLIM problem.
\BLADQA3.$SYSTEM.ZSERVICE 26> fileinfo zcl04*
$SYSTEM.ZSERVICE
CODE EOF LAST MODIFIED OWNER RWEP PExt SExt
ZCL04D01 1729 21759572 18MAY2011 11:29 255,255 CCCC 84 84
ZCL04L01 101 28600 18MAY2011 11:29 255,255 CCCC 14 14
ZCL04L02 101 2048 19MAY2011 14:35 255,255 CCCC 14 14
\BLADQA3.$SYSTEM.ZSERVICE 27>
For more details, see “Collecting Data for CLIM Issues” (page 206).
Setting Up Multiple Providers per CLIM
Effective with the H06.25/J06.14 RVU, a CLIM can be associated with multiple data providers if
the MULTIPROV attribute of the CLIM object is set to ON (enabled). The default is OFF (disabled),
which configures the CLIM to use pre-Multiple Providers per CLIM behavior and use the sole provider
specified by the PROVIDER attribute of the CLIM object.
Each CLIM contains configuration information indicating whether the Multiple Providers per CLIM
functionality is enabled or disabled.
When you enable the Multiple Providers per CLIM functionality, you associate a data provider
with one or more data interfaces, which can be changed by using the climconfig command. See
climconfig.prov(1) for a description on how to add, delete, and obtain information on a provider.
See also these SCF commands and their guidelines for more information: “ADD CLIM” (page 226)
and “ALTER CLIM” (page 231). All the CLIMCMD commands and the SCF commands are described
under “CLIMCMD and CLIMCMD climconfig Commands (Man Pages)” (page 290) and “SCF
Reference for CIP” (page 216).
Enabling the MULTIPROV Attribute
To enable MULTIPROV for an existing CLIM object, follow these steps:
Example 16 Enabling MULTIPROV
1. To turn the MULTIPROV feature on:
> SCF ALTER CLIM $ZZCIP.clim-name, MULTIPROV ON
2. To verify that the MULTIPROV feature is on:
> CLIMCMD clim-name climstatus -o l
3. To add new providers:
> CLIMCMD clim-name climconfig prov -add prov-name
Setting Up Multiple Providers per CLIM 129