Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

New and Changed Information in the 541613-022 Edition
Authentication Events
These are the updates associated with Authentication Events, effective with the H06.27/J06.16
RVU:
• In Chapter 3, added new section “Configuring Transport of Authentication Events from CLIM”
(page 108).
IPSec Changes
• In Chapter 1, added resources to table, “Interface Resource Failover Behavior” (page 40).
• In Chapter 3, changed “climconfig tool” to “climconfig command tool” under “IPSec
Configuration” (page 48), “Configuration Changes” (page 48) and “Internet Protocol Security
(IPSec)” (page 48).
• In Chapter 3, made additions and changes to these subsections:
“Internet Protocol Security (IPSec)” (page 48)◦
◦ “IPSec Related Files” (page 49)
◦ “IPSec Configuration Files” (page 49)
◦ “Configuring IPSec (IP CIP)” (page 104)
◦ “Configuring Pre-Shared Keys” (page 105)
◦ “Configuring Security Policies” (page 105)
◦ “Configuring Security Associations” (page 106)
◦ “Configuring Remote Information” (page 106)
◦ “Using IPSec” (page 107)
Other Changes
• In Chapter 3:
Added information about the ifstop command in “Deactivating an Interface” (page 103).◦
◦ Added information to hplog under “Sample Safe Linux Commands” (page 69).
◦ Updated “Replicating the Configurations from One CLIM to Another CLIM” (page 99)
with corrected steps.
◦ Added information to “climbkup and climrstr Considerations” (page 115).
• In Chapter 4 under “Performing CLIM Firmware Updates with the System Running” (page 155),
Step 9 now indicates that you need to do a power cycle to complete the firmware update.
• In Chapter 10, made modifications to “TRACE PROVIDER” (page 278) description.
• Added a command to the considerations list (prov(1p)) of the –prov standalone command.
14