Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

You have now completed the procedure for upgrading a Telco CLIM. Continue upgrade operations
until all Telco CLIMs are updated.
Updating CLIM Software Using the OSM Low-Level Link
This procedure uses the IP CLIM as an example but the steps are the same for all CLIM types.
1. Log onto the OSM Low-Level Link on each CLIM.
2. This dialog box is displayed:
3. Select the Software Update option and, if updating INS on a Telco CLIM, also select the
Configure box.
4. Click OK.
The Software Update dialog box appears. If you selected multiple options, they are performed
in sequential order; first the software update, then the INS Software Update.
5. Select the correct software version from the Available versions on NSC drop-down
menu.
Upgrading CLIM Software and Firmware While Maintaining Network or Storage Traffic 147