Cluster I/O Protocols (CIP) Configuration and Management Manual (H06.16+, J06.05+)

New and Changed Information in Previous Editions
Changes to 541613-021 include:
DL380p Gen8 CLIMs
These are the updates associated with DL380p Gen8 CLIMs, which are effective with the
H06.26/J06.15 RVU:
• In Chapter 1 under “CLIMCMD Tool” (page 29), added Note and Example showing how to
set the TACL parameter SUPPRESSCLIENTBANNER to display the SSH Client banner.
• In Chapter 1 under “Integrated Lights Out (iLO)” (page 30), changed iLO 2 designation to
iLO to include all iLO versions.
• In Chapter 1 under “IP CLIM” (page 51), added Figure 12: “DL380p Gen8 IP CLIM 1 Interfaces
— Five Copper Ethernet Interfaces” (page 54) and Figure 13: “ DL380p Gen8 IP CLIM and
Telco CLIM Interfaces, Option 2 Three Copper, Two Optical Interfaces” (page 55) showing
diagrams and descriptions of ports used.
• In Chapter 1 under “Storage CLIM” (page 58), added Figure 17: “DL380p Gen8 Storage
CLIM Interfaces” (page 59) showing diagrams and descriptions of the Gen8 Storage CLIM
Interfaces.
Changed port numbering under all figures for consistency.
• In Chapter 8 under “Collecting iLO and IML Logs” (page 211), updated screens and steps to
show the latest version of iLO.
Sustaining Changes
• In Chpater 3 under “climbkup and climrstr Considerations” (page 115), added a note
indicating that a CLIM configured with T0853H01^ACB or later cannot be restored with a
pre- T0853H01^ACB backup. CLIMRSTR exits with errors if an incompatible backup file is
specified.
• Added a note to the -peer_idvalue field under climconfig.remote(1) to indicate that the entire
pathname has to be specified for idvalue type file.
Changes to 541613–020 include:
Multiple Providers per CLIM
Effective with the H06.25/J06.14 RVU, a CLIM can be associated with multiple data providers
simultaneously. These are the updates associated with the Multiple Providers per CLIM functionality:
• In Chapter 1, added section, “Multiple Providers per CLIM” (page 33) and modified sections
“Multiple CLIMs per Provider” (page 32) and “Using Multiple Providers” (page 34).
• In Chapter 1, added information on how multiple providers affect routing to “Routing in the
CIP Subsystem” (page 34).
• In Chapter 1, added information to “CIP iptables/ip6tables Support (climiptables)” (page 55)
to indicate that there is a separate configuration for each provider if MULTIPROV is ON.
• In Chapter 2, added MULTIPROV option to “Configure and Start CIP” (page 65) and “Configure
CLIM-To-CLIM Failover (Applies to IP CIP Only, Not Storage CIP)” (page 66).
• In Chapter 3, added a note on network-sensitive commands under “Using Linux Commands
and Custom CIP Commands” (page 69).
• In Chapter 3, updated syntax under “Entering CIP Commands” (page 71). Updated text for
MULTIPROV and added text that climconfig never requires the provider option to CLIMCMD.
• In Chapter 3 under “Policy Based Routing” (page 81), indicated that policy based routing
applies to all providers on the CLIM if the MULTIPROV ON option is used.
New and Changed Information 15